Start a conversation

Kamvas 13 Cable Connections

Confused on which port to connect which cable on your Kamvas 13?


The Kamvas 13 tablet display has two USB-C ports. You use a particular port or ports, depending on the type of cable you use. 


Connection #1: USB-C to USB-C Cable


The USB-C to USB-C type cable can handle both data transfers and carry power. Thus, using this type of cable will have less clutter in your connection.


When using the USB-C to USB-C cable, use the USB-C port on the left-hand side of the image below. If you use your Kamvas 13 with your phone, to prevent your phone's battery from draining easily, you can connect a USB-C to USB-A cable to your power supply through the other USB-C port (right-hand side).


NOTE: The USB-C port of your computer/laptop/Android devices must support USB3.1 Gen1 and DP1.2 standards.



Connection #2: 3-in-1 Cable


If you are using the standard 3-in-1 cable with your Kamvas 13, you need to connect it to the USB-C port on the right-hand side as seen in the image below. 



Make sure to connect all ends of the 3-in-1 cable to the necessary ports; the HDMI and the 2 USB-A's. The HDMI connection is responsible for the display, the black USB-A for the data connection, and the red USB-A is for the power source. If your computer or laptop has enough power, you can just connect it to your computer or laptop. Otherwise, you will have to connect it to a power plug. If your power connection is too far, you can use a USB-A to USB-A extension cable.


Choose files or drag and drop files
Was this article helpful?
Yes
No
  1. Arnon Hoog

  2. Posted
  3. Updated

Comments

  1. elise bonnefoy

    Pourquoi cachez vous la vérité et ne pas mettre les appareils compatibles ?!